Big Roll Anit Vibratiing Mat Pure Aluminum Foil Butyl Rubber Sound
Super Quiet & Easy To Cool Interior Compartment
- Easy To Install-Just Trim, & Apply
- 100% Butyl with 2mm Butyl Thickness
- 5mil Anodized Pure Aluminum Foil ,
- No Adhesive Required
- Easy To Cut Will Not Dull Scissors Or Knife
- Easy To Form Shape & Apply To Inside Of Floor
- craft paper release liner
The sound damping mat is a lightweight, high-grade pure aluminum
constrained-layer vibrational damper. conforms with effort to sheet
metal and other hard substrates. Material performance in optimized
for temperature ranges between 14°F and 140°F (-10°C to +60°C).
Material can withstand temperature extremes between -65°F and
+350°F (-54°C to +170°C) and is highly resistant to aging.
The acoustic loss factor "n" is used as a measure of a material's
ability to damp structure-borne sound by stating how much
vibrational energy (in steel sheets for instance) is converted to
heat rather than sound. For constructions containing several layers
of damping material, the combined loss factor "n comb" is used. The
theoretical maximum loss factor is 1 (no vibration). An undamped
1mm thick steel panel has a loss factor of roughly 0.001 at 200 Hz.
Dynaplate applied to that panel would increase the loss factor to
0.17 @ +20°C (+68°F). Multiple layers of Dynaplate improve sound
damping even more.
Can be die cut to shape and placed onto the body surface directly
on painted panels or after the sheet metal is cleaned before
painting (typically at the sealer application operation). is used
to treat metal panels, partitions, ducts, doors, bins, panels, and
so forth in railroad cars, buses, automobiles, and ships. It is
also used for ventilation ducts, relay cabinets, steel furniture,
home appliances, sink units, computer equipment, machine tools and
many other objects that suffer from vibration-produced noise.
Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner. Next, remove dust, grease,
moisture, and other foreign matter from the application surface.
Peel off the release liner. The simplest application technique is
to bend the mat slightly and attach it along its shortest edge.
Press the mat firmly into place, using a roller for larger pieces.
The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity. The temperature of the mat and application
surface should not be below room temperature during fitting.
Heating the material is not necessary.
|1. MOQ||50 Rolls|
|2. Raw Material||Pure Butyl Rubber|
|3. Size||As your required|
|5. Function||Vibration and Shockproof|
|6. Butyl Rubber Color||Black|
|7. Package||1 roll pack in a PE bag|
|8. Adhesive||Self Adhesive|