Building Sound Absorbing Cotton / Noise Absorbing Fabric Non -
Woven Heat Resistant
White Sound Absorbing Cotton For Car / Building / Car / KTV
Strong Resilience non-woven fabric sound deadener for car
C15 car sound deadener is produced with the non-combustible, light
weight, loose structure and high performance synthetic fiber, with
excellent sound absorbing performance.
The non-woven cloth covered on the surface protect the fiber from
weathering and increase life span. The internal porous micro fiber
can effectively absorb the high frequency noise.
It is widely used in car doors, roof, trunk, engine, chassis, etc.
Advantages of car sound deadening material :
Excellent sound-absorbing performance;
Less sound insulation materials;
A lighter weight can achieve a good thickness;
Compressible, and deformation;
Easy to paste;
High tech environmental protection;
Strong Resilience ;
And can replace other international products of the same
1. product Model :
4. Weight per square meters:
5. Total Weight Per Sheet :
6. Temperature range:
7. Packed with Carton
8. Total Dimension
Celsius -40 up to 110°
3 sheets / gift box
Release the structure transmission attenuation vibration energy
Reduce the vibration of the resonance frequency
Lessen the vibration of the structure shaking or the striking
Widely used in construction, automotive, home theater, air
conditioning and other electric equipment, also be applied to
thecar doors, Roof , floor, deck lids, wheel fender, back trunk ,
four-wheels and wings board, engine cover or other metal parts ,
Double side non-woven fabric increase the strength of the
sound-absorbing cotton , to protect the molten fiber
sound-absorbing material fluff, stable size, enhance appearance.
1. Use scissors, knife or die to cut the mat to the desired size
and shape before removing the release liner.
2. Next, remove dust, grease, moisture, and other foreign matter
from the application surface.
3.Peel off the release liner. The simplest application technique is
to bend the mat slightly and attach it along its shortest edge.
Press the mat firmly into place, using a roller for larger pieces.
The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity. The temperature of the mat and application
surface should not be below room temperature during fitting.
Heating the material is not necessary.
Welcome To Your Kindly Contacting !
We Will Reply You As Soon As Possible .