Grey 2 mm Car Sound Deadening Pads , High Density Sound Insulation
2mm Sound Insulation Pad Butyl Rubber Material For Cars / Machine /
1. Excellent Self-Adhesive property
2. Environmental Protection
3. Good Early Sticky And Viscous
4. Flexible And Conformable
Competitive Advantage :
Butyl rubber pad adopts advanced polymer materials and made of
advanced production technology, non-toxic, fire prevention,
waterproof, shock-proof, easy construction, permanent sticky, have
very strong viscosity, etc.
Loved by consumers all over the world for many years.
C1 is produced with the brand new ingredient of the environmental
protection, no unpleasant smells pure butyl rubber and the
environmental protection polymer material.
We apply a special corrosion resistant and bioglide coating film
technology and make sure that the surface of the aluminum foil is
steady and anti-oxidant.
Our products will eliminate the bad effect of the aluminum oxidant
process that may affect the health of human body.
Moreover, our products are of great quality: the early sticky and
the viscous could reach the index of GB4852-84/T4851-2002. In the
test of ROHS PB , Cd , Cr+6 , Hg , PBBs and PBDEs are not found.
|Technical data :|
|1. product Model :||C1|
|2. Aluminium thickness :||0.1 mm|
|3. Butyl thickness :||1.9 mm|
|4. Weight per square meters :||3.8 KGS|
|5. Total Weight Per Sheet :||1.4 KGS|
|6. Temperature range :||Celsius -40 up to 160°|
|7. Packed with Carton||4 gift boxes / Carton|
|8. Total Dimension|
460mmX820mm (=0.3772 M²) / Sheet
Accept your request size !!
1. Use scissors , knife or die to cut the mat to the desired size
and shape before removing the release liner.
2. Next, remove dust , grease , moisture , and other foreign
matter from the application surface.
3. Peel off the release liner. The simplest application technique
is to bend the mat slightly and attach it along its shortest edge.
Press the mat firmly into place, using a roller for larger pieces.
The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity. The temperature of the mat and application
surface should not be below room temperature during fitting.
Heating the material is not necessary.