Silver Vibration Damping Material Pads Aluminum Foil Butyl Car
1. This great product will keep the inside of your ride cool and
quiet - it's easy to install and keeps out the heat and unwanted
noise, works so good that of you put it in your doors it gives them
a solid modern sound when they close.Could be used on floors,
firewall, door panels, trunk, roof and any interior areas that
should be insulated
2. Material:Butyl Rubber And Aluminum Foil
3. No powder & Excellent vibration resistance
4. Excellent sound absorption properties
5. Will not contribute to metal corrosion
6. Very clean, not absorb odors, odorless
7. Easily installs,fit all kinds of vehicle type
8. Self sticking backing & Waterproof,dustproof.
1. Remove the door panels
2. Install the screws back in original place, it will easy be found
when you mount, avoiding holes be covered
3.With roller tools will make insulation materials and sheet metal
firm fit, and play best adhesive, damping performance
4. According to the effect you want choose construction program,
only single Soundproof/Damping Plate or single Heat & Noise
Insulation Cotton or Both them.
5. You can also use on car roof floors, hood , firewall, chassis,
trunk room, trunk lid and so on.. Do not cover the chassis wiring
or air holes.
The very sticky butyl rubber layer is Green, accord with the ROHS
no smell, good elastic,high temperature resistance capabilities
ever. Use it on your doors, floor, roof,
hood and trunk for a quiet, cool and incredibly solid ride.
Mainly used in car doors, hoods, trunk floors , a special corrosion resistant and bioglide coating film technology
and make sure that the surface of the aluminum foil is steady and
|1. Aluminium thickness||0.1 mm|
|2. Butyl thickness||1.9 mm|
|3. Weight per square meters||3.8 KGS|
|4. Total Weight Per Sheet||1.4 KGS|
|5. Temperature range||Celsius -40 up to 160°|
|6. Packed with Carton||20 pcs / Carton|
|7.Total Dimension||460mmX820mm(=0.3772 M²)/Sheet|
|8. Raw Material||Butyl Rubber And Aluminum Foil|
|9. Function||SoundProof ShockProof|
|10. Product Thickness||1.9mm Butyl Rubber Plus 0.1mm Aluminum Foil|
We do not use the butyl rubber of the Cheap.
Our products are well withstand the hot summer days and high
Less smell, better durability. After mounting it is possible for a
long time using.
It is very suitable for soundproof bonnet.
Facing layer – flexible and strong aluminum foil that increases
soundproof properties of the material and also provides the
mechanical protection. The impression has the form of the grid with
the jutting out foursquare. This particular form as opposed to
standard embossing ensures a higher soundproof level and additional
rigidity and makes the process of cutting easier.
Vibro-absorbing, multilayer, self-adhesive material. Mostly used
for the vibration absorption and sound deadening of noises coming
from the heavy-loaded surfaces: engine bulkhead, wheel arches, car
The layer of the black color is a high-filled low-weight composite
material based on caoutchouc. It has high-level vibro-absorbing
properties and additionally protects the car body against
corrosion; possesses permanent adhesiveness and high elasticity.
The paste layer is resistant to environmental factors including
moisture and temperature fluctuations. During installation, a sheet
of the material must be rolled down to the base for the final
The paste layer’s mounting surface is secured with the release
paper, which needs to be removed just before the installing of the
material. On the release-layer surface there is a logo acting as a
counterfeit protection and a ruling which makes cutting and
installing easier. Due to high-quality release paper, the
manufacturer guarantees adhesive properties retention for 12 months
since the production date. After installation working lifespan is
not limited and corresponds to the useful life of a car or any
other object providing abidance by the rules of installation and